2-144 core Single Mode 9/125 No-metallic/No-armored GYFTY Fiber Optic Cable

2-144 core Single Mode 9/125 No-metallic/No-armored GYFTY Fiber Optic Cable

The fibers, 250um, are positioned in a loose tube made of a high modulus plastics. The tubes are filled with a water-resistant filling compound . A fiber Reinforced Plastics (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. Then the cable core is covered with a thin Polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress. A layer of water blocking material is applied around the cable core to prevent it from water ingress all the same. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.

2-144 core Single Mode 9/125 No-metallic/No-armored GYFTY Fiber Optic Cable

1.Good mechanical and temperature performance

2.High strength loose tube that is hydrolysis resistant

3.Special tube filling compound ensure a critical protection of fiber

4.Crush resistance and flexibility

5. The following measures are taken to ensure the cable waterlight:

a. Single Fiber Reinforced Plastics as the central strength member

b. Loose tube filling compound

c.100% cable core filling

d. PSP enhancing moisture-proof

e. Water-blocking material

2-144 core Single Mode 9/125 No-metallic/No-armored GYFTY Fiber Optic Cable

Standards: Comply with Standard YD/T 901-2009 as well as IEC 60794-1.

Application: Duct/Aerial/ Direct buried